C-MARK Bass Amplifier FB15/FB15S

the new FB15/FB15S bass amplifier represents the finest bass amplification available today, utilizing semiconductor technology

Introduction

We announce the new FB15/FB15S bass amplifier both represent the finest in bass amplification available today, utilizing the latest semiconductor technology in power amp design, the FB15 set the standard for exemplary performance.

Featuring an external speaker output, a balanced line level output, limiter, and much more, each of these combo packages a C-MARK punch. The following list reflects list the many features found on the FB15/FB15S bass amplifiers.

Specifications

Rated Power & load:

150 W RMS / 4 ohms (100W forFB15S), 200W RMS / 2 ohms

Power @ clipping: (typically) (1 kHz, 120 VAC line):

165W RMS/4 ohms @ 5%, 230W RMS/4 ohms @ 5%

Frequency response:

+0, -3dB, 20 Hz to 20 kHz @ 140 W RMS / 4 ohms

Total harmonic distortion:

Less than 0.1%, 100 m/w to 140W RMS / 4 ohms 20 Hz to 10 kHz, typically below 0.05%

Dynamic range: Greater than 20 dB

Maximum THD: Below 0.6% THD for 6 dB overload

              Below 1% THD for 16 dB overload

Hum & noise: Greater than 95 dB below rated power

Power consumption: (Domestic) 220 W @ 120 VAC, 50/60 Hz

Features

•  Active / Passive select switch

•  Pre gain and volume controls

•  Bright switch

•  Contour bypass switch

•  Send / Return patch (footswitchable on FB15)

•  Low frequency shelving control

•  High frequency shelving control

•  Seven-band graphic EQ

•  EQ In/Out switch

•  Balanced line level output w/ground lift switch

•  Headphone output

•  Power/Status LED

•  External speaker output

C-MARK Bass Amplifier FB15/FB15S